Enquire Today
Back to Latest News

Jaltest 24.2 Software Update Released

We are pleased to report that Jaltest has now released their latest diagnostic software update, which has made the leading multi-brand diagnostic software better than ever before!

As you would expect, the latest update is packed full of new innovations and improvements across all vehicle types, which covers the following vehicle types: Agricultural Vehicles, Commercial Vehicles, Off-Highway Machinery, Marine Vessels and Material Handling Equipment.


What’s new in 24.2?


Jaltest CV

  • Knorr-Bremse diagnostics add-on (formerly NEO Green) integrated into Jaltest Diagnostics
  • OEM RMI for DAF
  • More Central Services added
  • Ability to send files attached to the diagnostics report by e-mail
  • New models of BYD TRUCK – ETH8 EV & EYT EV
  • DAF ECS-DC6 engine control system in the LF E6 model, Freeze Frame Data (FFD)
  • New models of SCANIA – C 320C B [2020 – …], C 340C A [2020 – …], K 280C B [2020 – …], K 310 IA, K 500C B [2020 – …], F 340 HA
  • IVECO ECM MD1 CNG/LNG engine control system in S-Way NP, X-Way NP models, replacement of components such as the Lambda sensor, the throttle valve and the spark plugs.
  • And…much more!
Read the full innovations list here.


Jaltest AGV

  • New tractor brand: HATTAT
  • New KUBOTA models – M6U Series, M5002 Series, M6002 Series
  • NEW HOLLAND CR Series, engine: Tier 5/Stage V
  • New brand of trailing implements: SGARIBOLDI
  • New repair SMART guides by fault code in the EDC MD1 CS069 engine control system of the FPT brand, present in several models of tractor and implement brands such as CNH, JOHN DEERE, LANDINI, MCCORMICK or PELLENC, among others.
  • Extended manual diagnostics coverage in several models of different brands such as CASE iH, JOHN DEERE or NEW HOLLAND, among others
  • ARBOS TCU transmission, actuations and calibrations for 5100, 5115, 5130, 7220, 7240 and 7260 models
  • And…much more!
Read the full innovations list here.



Jaltest OHW

  • New PONSSE brand, manufacturer of forestry machines
  • New LIEBHERR models, including 6 models of R Series crawl excavators
  • Increased number of models in DOOSAN, MECALAC and WACKER NEUSON brands
  • 15 new MECALAC models and 4 new families, such as MRAIL Series crawl excavators
  • Increased number of models in the KHOLER brand, these are gasoline engines with Delphi injection control system.
  • Larger number of wiring diagram configurations among the most relevant engine control systems following any selection path in the different brands.
  • New advanced actions such as the exhaust gas aftertreatment system checks in the DieselMax 448 engine control system in JCB STAGE V engines. This system is available for STATIONARY ENGINE and other brands such as BUCHER.
  • And…much more!
Read the full innovations list here



Jaltest Marine

  • MERCURY DIESEL SIM G3 Gateway, new software variants that enable the latest models to be covered, including specific measurements of every variant and technical data of system components.
  • SCANIA XPI engine control system, new software variants that provide coverage in the latest engine models: DI13 076M, DI13 087M, DI13 088M, DI16 076M.
  • VM MOTORI SMART repair guides by symptom in the following models: – MR 506 SH3. – MR 506 SS3.
  • SUZUKI Advanced functionalities in engine control systems such as trim calibration, idle speed change parameter configuration, maintenance service reset and electronic key programming (compatible models only).
  • TOHATSU ECM engine control system that applies to new MFS 75, MFS 90, MFS 100, MFS 115 and MFS 140 models.
  • YAMAHA The Jet Series family is created with SuperJet and JetBlaster models that include the development of a new ECM EFI engine control system
  • And…much more!
Read the full innovations list here.



Jaltest MHE

  • New EP, FENWICK and TAILIFT brands.
  • In addition, the number of models in the following brands has increased: BT (Staxio Series electric stacker family), HANGCHA (XF Series forklift family), JUNGHEINRICH, LIUGONG (CPCD Series forklift family), STILL (RX Series forklift family), TOYOTA and XCMG (FD Series forklift family) in which models of different types of vehicles, both electric and internal combustion engines, have been added.
  • HANGCHA EDC engine control system in forklifts of internal combustion that includes the Diesel Particulate Filter regeneration.
  • JLG DEUTZ EMR5 – EDC MD1 engine control system for lift platforms, checks.
  • JUNGHEINRICH MCM central computer for retractable forklifts. MCM central computer for stackers in models from 2018 onwards, maintenance reset in EJC Series, ERC Series and ERD Series families.
  • And… much more!
Read the full innovations list here.

You may also like

Related news articles

Enquire today

We have experienced consultants waiting
to take your enquiry.
I'm Interested in...
Sign up to our newsletter

Recieve the latest news on products from Eclipse Automotive

Speak to one of our experts