FAQs

A trailer is in need of a new EBS ECU due to an internal failure, can we copy/paste onto a EBS ECU?

Published:

Q - A trailer is in need of a new EBS ECU due to an internal failure, can we copy/paste onto a EBS ECU? A - If the software variants are the same then yes we can, however if there not we can still use the data to program the new EBS ECU from...

Read the whole post

On a Renault Premium DXI the APM (Air Processing Module) requires changing, however informed it requires programming, can we do this?

Published:

Q - On a Renault Premium DXI the APM (Air Processing Module) requires changing, however informed it requires programming, can we do this? A - Jaltest can copy the ECU contents out of the old module and paste into the new one aslong as the software variants are the same.

Read the whole post

An Iveco Daily 2012 needs a replacement clutch, can Jaltest calibrate once fitted?

Published:

Q - An Iveco Daily 2012 needs a replacement clutch, can Jaltest calibrate once fitted? A - Yes Jaltest can calibrate a new clutch, however ensure genuine Iveco parts are used.

Read the whole post

I have a Scania R480 which has the brake lights stuck however no faults have been detected, what can cause this?

Published:

Q- I have a Scania R480 which has the brake lights stuck however no faults have been detected, what can cause this? A - A common fault we have found is to be a failure in either relay RP20 or RP7, causing the lights to remain on.

Read the whole post

I've come to enter my Expert Code however it's stating its incorrect. What can cause this.

Published:

Q: I've come to enter my Expert Code however it's stating its incorrect. What can cause this. A: Expert Codes are valid unless a major update has been installed. You can apply for a new code at Jaltest. com

Read the whole post

A customer has brought a 2016 Iveco Daily into us after having the DPF replaced but the EDC light is still on?

Published:

Q: A customer has brought a 2016 Iveco Daily into us after having the DPF replaced but the EDC light is still on? A: After replacement of a DPF the ECU needs to be informed of this. Jaltest can reset the DPF filter.  

Read the whole post

We have a 2014 Ford Transit which has had a new set of four injectors. They need to be coded, can we do this?

Published:

Q: We have a 2014 Ford Transit which has had a new set of four injectors. They need to be coded, can we do this? A: Injector coding is available for Ford Transits, aswell as many other manufacturers.

Read the whole post

I'd like to check the clutch wear on my Scania R Series Opticruise gearbox

Published:

Q: I'd like to check the clutch wear on my Scania R Series Opticruise gearbox A: Under system checks you can view the status of the clutch assembly to see the status of the clutch wear.

Read the whole post

I have a fault code and description but unsure where the component the is and how to test it?

Published:

Q: I have a fault code and description but unsure where the component the is and how to test it? A: Jaltest provides the user with component locations, test values and troubleshooting guides to help.

Read the whole post

Does Jaltest include wiring diagrams?

Published:

Q: Does Jaltest include wiring diagrams? A: Yes Jaltest has an extensive library of wiring diagrams and technical support information

Read the whole post