Eclipse Automotive Technology Ltd
Vehicle Diagnostics from Texa, Jaltest & Eclipse
TEXA IDC4 automatically manages the connection to all TEXA tools. It is therefore possible to switch from auto diagnostics, to gas analysis and the oscilloscope, during the same test on the same vehicle, without ever interrupting the work session.
Texa Navigator TX interfaces also feature the exclusive Powered by Google SEARCH function and TGS2 function for automatic scanning of available vehicle systems (ECU's).
SAE J23534 Pass Thru
Discontinued Texa tools
Texa Navigator TXT is the ideal replacement for Texa Axone 2000 and Texa Navigator Mobile diagnostic units.
Texa Navigator range of diagnostic and autodiagnostic interfaces
- Texa Navigator TXT in use
The NAVIGATOR TX range of diagnostic and autodiagnostic interfaces is the result of constant research and the development of advanced solutions dedicated to simplifying the work of the mechanic. TEXA has created a choice of three advanced instruments, all implementing innovative technologies, including Bluetooth wireless communications to eliminate unwanted cables around the workshop.
In developing these interfaces, TEXA has concentrated on reducing connection times and increasing practicality.
Thanks to 64 Mb of internal memory dedicated to storing program data, the delay in establishing communications with the vehicle’s control can be reduced by over 70%.
NAVIGATOR TX devices interfaces are also equipped with automatic internal switching for communicating with control units on vehicle makes and models without additional adapters.
NAVIGATOR TX interfaces let you perform all common autodiagnostic tests including:
- error reading and clearing
- engineering parameter and activation status viewing
- oil change light reset adjusting and configuring
- service and airbag
- control unit configuration
- keys and remote controls
- adjustment of carburetion and injection times (BIKE sector)
- Navigator TXC status LEDs
- Navigator TXT front connectors
- Texa Navigator TXB USB connectors
Wireless diagnosis for cars, bikes and trucks (TXC only cars)
- Multibrand and multi-environment diagnostics for PC and Pocket PC
- Quick connection to diagnostics systems
- Wireless Bluetooth or USB cable connection
- Updates available over the internet (operating software)
- Fully compatible with the cables used for previous diagnostics tools
- Compact and light
Texa Navigator TX Range specification (TXT | TXB | TXC)
- Processor
- INTEL PXA255 400MHz
- Internal memory
- 64 MB SDRAM, 64 MB FLASH
- External power supply
- 8 - 32 Volt
- Typical power consumption at 12 V
- 0.25 A
- Typical power consumption at 24 V
- 0.18 A
- Power supply connector
- 4-pin mini-DIN
- USB ports
- 1 USB 2.0 device, 1 USB 2.0 Host, possibility to update SW via USB pen drive
- Wireless communication with PC
- Bluetooth 2.0
- Electronic switching
- 13 K & L lines with 100 mA FPGA based current protection
- Diagnostics connector
- AMP CPC2 28 pin, male contacts
- Operating temperature
- + 0 °C / + 45 °C
- Storage temperature
- - 20 °C / + 60 °C
- Operating humidity
- 10% - 80% non-condensing
- Types of protocols
- Blink codes, CAN ISO 11898 and ISO 15765-4, K - L, ISO 9141-2, ISO 14230 (Keyword 2000), SAE J1850 PWM 41.6 Kbps and VPW 10.4 Kbps, ISO 11519-2, SAE J1708 – FMS compatible
EOBD (all protocols)
- ISO 15031-5, ISO 15765-4
- Dimensions
- 155x165x55 mm
- Weight
- 1.0 kg
Texa Navigator Cable Kits
- Texa Truck cable kit
- European car cable kit
- Motorcycles cable kit
- Asian car cable kit