New Jaltest Soft Version 5.12.1 available now

Log in to your jaltest.com account to download either a full 12.1.1.1 installer [1.29 GB] or a smaller file to update from 5.11.3.x (x represents partial versions) [484.81 MB]

---

Diagnostic functions and new systems

Heavy Truck

DAF

XF105, CF85 IV	EMAS	New System
XF105, CF85 IV	BBM	New System
XF105, CF85 IV	SWS	New System
XF105, CF85 IV	DTCO	New System
XF105, CF85 IV	AS-Tronic	Parameters
XF95, CF85	Immobilizer	New System
XF95, CF85	EBS	Parameters
XF95, CF85	MTCO	New System

Isuzu

N-Series	Smoother Transmission	New System
N-Series	4HK1	New System
N-Series	4JJ1	New System

Iveco

EuroCargo Euro 4/5 Stralis Euro 4/5	VCM	New System
EuroCargo 2003	Instrument Cluster	New System
EuroCargo 2006	Instrument Cluster	New System
EuroCargo 2006 Trakker Euro4/5	MET	New System
Stralis 2003	AsTronic	Parameters
Stralis 2003	EBS	Parameters
PowerStar		New Model

Bus & Coach

BMC

HAWK, Probus/Procity Euro5	ABS6	New System
HAWK, Probus/Procity Euro5	ISBe5 285 (Euro5)	New System

Iveco Irisbus

EuroRider	VBC (Multiplex)	New System

MAN

TGX & TGS	PTM	New System
TGX & TGS	ECAS CAN	New System

Mercedes Benz

Actros 2/3	DTCO	New System
Axor OBD	CBU	New System
SK,MK, LK	ENR	Clear Errors
SK,MK,LK	FMR	Clear Errors

Renault

DXi Models	EDC	Component Activation

Volvo

E98 and V2 models	EDC	Component Activation

For details of updated and improved vehicle coverage download the JalTestSoft Innovations List 12.1 pdf document [4.15Mb] below or the full application list [8.91Mb] (also below).

Software Interface Enhancements

A few subtle but powerful improvements have been introduced for a more streamlined user experience.  These include model selection filters to speed vehicle selection,measurement units and business management diagnosis report filters.

Firmware update

Please note that the software license allows you to install Jaltest Soft on three separate machines at any one time.  If you take advantage of this please ensure that machines are updated at the same time.

On applying the software update to the first computer you must also update the firmware in the multiplexer when prompted to do so.  When you apply the same software update to the other computers you DO NOT need to update the multiplexer firmware again so you should choose cancel when the installer requests you firmware update.

---

Posted in: Jaltest, Truck Diagnostics, Software
27 February 2012